Autumn Magnet shelf by Layersingreen

Description

🍁 Magnet shelf 🍁 - 3 walls, 15% gyroid or 3D honeycomb infill, No supports - I used 5x2 magnets (5x3 will fit too), I buy them from amazon. CA. You can find them here - Amazon Magnets - The magnet holes are hidden within the body of the leaves and shelf and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version. To check place magnet on print bed and see if they stick. - You will need to add a pause in the slicer prior to printing in order to insert the magnets. at 0.2 layer height add a pause on layer 21. - Print shelf first, magnet orientation doesn't matter. When leaves are paused, place magnets onto printed shelf, pull magnets off the shelf and insert magnets into leaves with the same orientation, careful not to flip them. - Do not split to parts or objects - Shelf can be hung on a nail ⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐++📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on patreon - Click here | Download free and paid 3D printable STL files