Sakura Metropolis

Description

Thank you for looking at my creations! 💕If you enjoyed them, don’t hesitate to leave a ❤️ and follow me — it motivates me enormously to continue creating!World of GLT 3d offers you:Boost MeHappy printing! Don't hesitate to give it a like or/and un Boost it encourages my work ;-)BoostProject: Sakura Metropolis.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 134.25x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #c00d1e PLA BambuLab Basic Red Transmission Distance: 3.7 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 4.4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 2 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Cobalt Blue At layer #17 (1.40mm) swap to Red At layer #20 (1.60mm) swap to Pumpkin Orange At layer #23 (2.00mm) swap to Cyan At layer #28 (2.40mm) swap to Hot Pink At layer #31 (2.80mm) swap to White At layer #33 (3.80mm) swap to Black for the rest.(Printed on Creality Hi)3D printing : World of Glt 3dPersonal use only. Do not redistribute or sell the files. All rights reserved. © 2026