Dr Strange Sling Ringby leigh johnson

Description

Had to pretty much learn fusion 360 from the ground up just to design this. Made it as close as I could to pictures I found on the interwebs. Printed it at 80% which fit my hand pretty well, only print at 100% if you are a giant. Printed with the rings bottom touching the build plate and the face upward to get the best detail on the top. Needs supports for the overhangs each end and the inside of the rings (set cura to support everywhere and use brims).I am new to fusion 360 so there are probably a ton of mistakes in the way it is put together but it printed fine on my ender 5 and I am fairly confident it should print fine in resin. Let me know how you get on and if there is anything I can do to improve it.If you download, print and like it please consider rating it and giving it a like hereinfill: 10% with 3 wallsprinted with: Ender 5 pro with Hemera direct drive using sunlu grey PLA filamentused brim and supports everywherescaling: 80% seems ok for an average size hand (if you want to be sure of size before commiting to the full print just print couple of mm slice of the profile first to test)Would love to see your make photos here too, will try and get my pics up soon when I have finished painting it.youtube timelapse of the print here:https://youtu.be/XBeWiYsey5Y