Hinged Storage Box – Snap-Close Lid No Support

Description

📦 Hinged Storage BoxA clean, minimalist box with a proper hinged lid and a built-in snap closure.Once it clicks shut it stays shut — you can shake it and the lid won't pop open.Perfect for small parts, tools, jewelry, cards, EDC gear, dice or anything youwant to keep organized and dust-free.🧩 4 PARTS (separate STLs)- Top (lid)- Bottom (base)- Hinge Pin x2 — the two pins that connect the lid to the base🔩 ASSEMBLY — PLEASE READ1. Print all parts.2. Line up the lid and base so the hinge knuckles interlock.3. IMPORTANT: Put a small drop of super glue on the HEAD of each pin BEFORE inserting it. Then push the pin into place. ⚠️ Without glue the pins will work their way out over time — gluing the pin heads gives a much cleaner and permanently secure hinge.4. Let the glue cure, then close the lid until the clip snaps. Done!🖨️ RECOMMENDED PRINT SETTINGS- Material: PLA or PETG- Layer height: 0.2 mm- Walls: 2 • Infill: 15–20%- Supports: not needed- Print the lid and base flat on the bed for the best hinge alignment✨ FEATURES- Snap-close lid — stays shut even when shaken- Real pin hinge, opens and closes smoothly- Clean minimalist look (looks great in matte black!)- Fast, tool-free assembly — just glue and pushIf you print one, I'd love to see it — post a make and leave a like! ⭐