K2 plus CFS

Description

Hi everyone,I’ve made front and rear silica gel boxes for the CFS. There’s nothing extraordinary about them—they’re similar to existing designs—but I made the front ones interlock with each other. For the rear ones, I used guide rails and a magnet so they can be easily inserted and removed. The base simply attaches with double-sided tape. I’m also including a funnel for filling the silica gel; once filled up to the funnel's neck, just shake it side-to-side to distribute the granules evenly, and you’ll automatically get the correct fill level.You will need two 15x4 magnets and two 6.5x17x1.5 washers (the kind used for M6 bolts). These washers need to be glued to the bottom of the box so the magnet can latch onto them.Note: Before gluing down the rear base, assemble everything and test how the CFS lid closes.That’s it. Good luck, everyone!