RCWL-1670 case

Description

This is a case for the waterproof RCWL-1670 distance sensor. There are 2 parts that slide over each other for waterproofing. I glue the parts together.The holes are a tight fit arround the accoustic sensors. I print that part in TPU. Make sure the fit is not too tight or it will have influence on the measuring. When you get a measured value around 4cm, that means that the fit is just to tight because the sound vibrations travels through the sensor instead of reflecting on the to measure surface. The other part is printed in PETG.It's made for a 5mm cable. https://nl.aliexpress.com/item/1005008665772227.html?spm=a2g0o.productlist.main.23.1f3cpMFNpMFNPC&algo_pvid=5d0fde9c-2752-4d6c-932f-9376f8a74dad&algo_exp_id=5d0fde9c-2752-4d6c-932f-9376f8a74dad-22&pdp_ext_f=%7B%22order%22%3A%22997%22%2C%22eval%22%3A%221%22%2C%22fromPage%22%3A%22search%22%7D&pdp_npi=6%40dis%21EUR%214.73%213.45%21%21%2135.86%2126.18%21%40211b653717831904008404347e116f%2112000046152421522%21sea%21BE%211770935566%21X%211%210%21n_tag%3A-29919%3Bd%3A9d6dc5bc%3Bm03_new_user%3A-29895&curPageLogUid=q4mTtO8PmAuB&utparam-url=scene%3Asearch%7Cquery_from%3A%7Cx_object_id%3A1005008665772227%7C_p_origin_prod%3AChoose the 0.3 square version.