10 x 10 x 15

Description

This model is designed to print with all parts laying horizontally on the print bed. Due to its size, this file needs a large bed printer capable of at least 280mm x 280mm. It is not recommended to try and reorient the parts to make them fit as it would require tremendous amounts of waster plastic for supports This is a 3D printable frame for a DIY enclosure suitable for invertebrates and reptiles that require an arboreal living space. My design is more minimalistic than other models of similar design. My goal is to make your pet the center of attention, not the enclosure. It features a large swinging front door that is capable of opening nearly 270 degrees so that you have full access to the interior. the Door is secured by a single pin that securely locks the door. My top hatch is held in place with 9 rare earth magnets and when removed gives you nearly unobstructed access to the interior of the enclosure from the top. I have also incorporated a stacker component that allows you to stack two of these enclosures together. The stacker maintains proper airflow between the top and bottom enclosures and features a shelf that can hold LED strips so that the bottom unit can be lit independently from the top unit. The stacker can be installed 3 ways. It can be adhered to the bottom of an enclosure to serve as a raised base for a single enclosure, or it can be adhered to the bottom of an enclosure so that it can be stacked on top of another enclosure, or it can simply be placed…