Starmix to Dyson Vacuum Adapter

Description

This is a custom 3D-printable adapter designed to seamlessly connect a Starmix vacuum cleaner hose to standard Dyson vacuum accessories. Perfect for utilizing the great variety of Dyson tools with the industrial suction power of your Starmix!🛠️ Additional Parts RequiredTo ensure a perfect, airtight seal, you will need one extra hardware component:1x O-Ring / Gasket: 3mm thickness with a 42mm outer diameter (42 mm×3 mm).🖨️ Printing & Post-Processing InstructionsOrientation: Print the adapter with the Starmix side facing down on the build plate (as shown in the slicer preview).Supports: Support must be enabled.Post-Processing: After printing, it is highly recommended to use a bit of sandpaper to smooth out the inside of the Starmix connector side. This ensures a smooth, snug fit onto the hose without sticking.How to AssembleClean up any support material and lightly sand the inside of the Starmix fitting.Seat the 3mm O-ring into its designated inner groove on the Dyson connector side.Twist/push onto your Starmix hose, click your favorite Dyson accessory into the red-button connector side, and you are ready to clean!If you like this design, please consider leaving a like or uploading a make!