ExoBass - Wing Sets - Hex Splat

Description

Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.comPlan Your Build & Get HardwareExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.You can find this specific part, ExoBass - Wing Sets - Hex Splat, on our site.⚠️ This wing set is a prototype and is not as polished as the others. Assemble at your own risk.ℹ️ This wing set requires a 2020 cut to 970mm and not 930mmStep 1: Heat Set InsertsUsing a soldering iron, insert the top and bottom heat set insertsStep 2: Strap MountsPut together the Strap mount assembliesStep 3: Glue in face platesStep 4: Attach to coreStep 5: ElectronicsStep 6: Optional PickupsIf you would like to attach either the Lace Ultra Thin Pickup or the Over String Pickup Mount to this WingSet, you will need to print and install the Pickup Core.HardwareDIY KitYou can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.68 plus shipping.Self SourceIf you want to order the parts yourself, here's a list. Estimated cost: $75.98.12x Screw - Button Head - M5x1012x Nut - Slide In - M52x Heat Set Insert - M3 - 4.8mm OD - 4.6mm L - Flanged10x Screw - Flat Head - M3x1010x Screw - Flat Head - M3x2020x Heat…