MTG Deck Box with Mana Symbol Lid

Description

A cap-lid deck box sized for a 100-card sleeved Commander deck. Cards sit sideways inside, so the lid wraps the outside of the body — no flange eating into the card cavity. Half-moon thumb notches on the body and lid align into a D-shaped finger hole at the seam: just push a thumb in and lift the lid off. Red MTG deck box, closed, with an embossed mana symbol on the lid https://files.catbox.moe/20fn9t.jpg 🎨 Pick your mana colour The lid top has an embossed mana symbol. Pick one of the five colours — each comes as a pair of STLs: | File | What it is | Print qty | |---|---|---| | mana_box_body.stl | the box body (fits all lids) | 1 | | mana_lid_ .stl | lid shell with a recessed symbol pocket | 1 (your colour) | | mana_lid_symbol_ .stl | the symbol, sized to drop flush into the pocket | 1 (your colour) | is one of W / U / B / R / G. 💡 Print single-colour and paint-fill the recess, or print the lid and symbol as two filaments in Bambu Studio / AMS for a clean two-tone finish. The box open beside a full sleeved deck standing on top, showing the side-loading card cavity https://files.catbox.moe/v81dcw.jpg 🛠️ Print settings | Setting | Value | |---|---| | Printer | Bambu Lab P2S (any FDM) | | Material | PLA or PETG | | Layer height | 0.2 mm | | Walls | 3 | | Infill | 15% | | Supports | none | | AMS colours | 1 (paint-fill) or 2 (lid + symbol inlay) | Orientation: - Body — flat on the bed, open side up. - Lid — pre-flipped in the STL so the top slab lies on the bed and the skirt…