FNIRSI 1013D Gridfinity Bin

Description

This is a Gridfinity (https://gridfinity.xyz/) bin set for the FNIRSI 1013D oscilloscope and its two probes. The bin for the 1013D oscilloscope is a slightly modified standard Gridfinity bin, so you can also use it for something else if you ever want to. Both bins are 1×5×6 grid units with a stacking lip. The probe bin has a separator to help keep the probes organized. The bins use Pred’s labels (https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame), and the included labels were made with this generator (https://gflabel.org/) (height set to 11.1 mm). In the slicer, I colored the upper part where the stacking lip starts to widen, so it can be printed with a single color change. I set the Wall Generator to Arachne, Bottom Shell Layers and Top Shell Layers to 2, and Top Shell Thickness to 0.6 to save a bit of filament (see screenshot). For the labels, I set Top Surface Line Width to 0.3 and Minimum Wall Width (for the Arachne wall generator) to 60. Otherwise, the default settings should work fine. In general, it’s designed to be easy to print.