GaoDeers 3D DX Antlers - Hyakujuu Sentai Gaoranger/ Deer Wildzord - Power Rangers Wildforce

Description

The file contains 2 spears: 1 that is similar to the original design, with the back featuring the same "holes" as the original, and the second one has the front design on both sides. It is compatible with both the Japanese and American versions without any issues. If you can print with resin, I recommend it to improve the quality—especially if you have access to a good translucent resin. Similarly, use a durable and flexible material; I recommend PETG or FLEXIBLE, as this ensures the part’s strength. Also, remember to check the tolerances and, if necessary, enlarge the holes with a utility knife so that the parts fit together without too much force. In the photos, both prints were made with PLA; one is straight out of the printer, and the other has been post-processed. In the coming days, I’ll be uploading photos of the resin part so you can see the difference in finish. Remember to mirror the part if you need the reverse side; use the “Mirror” function in your slicer for this. IMPORTANT: BEFORE INSERTING THE PART INTO THE CONNECTORS ON THE GAODEERS HEAD, PLEASE DO SO GENTLY AND BY ROTATING IT BACK AND FORTH, AS IF THE TOLERANCES HAVE NOT BEEN CHECKED, YOU COULD BREAK YOUR FIGURE’S CONNECTOR WHEN TRYING TO INSERT IT. FOR PERSONAL USE ONLY. COMMERCIAL PRINTING IS NOT PERMITTED. Please help me continue uploading these projects by supporting my work. Downloads are for personal use only; you may not share, resell, or sell modified versions of these files or prints made from…