Demogorgon Head Lightbox

Description

Pre-Coloured 3mf File using 4 Colours, Rear drops into front with a lip to stop it recessing, Leaving enough space on the rear for a USB power supply (12mm) and a standard 8mm wide LED strip, I use the 8mm wide LED strips with sticky tape on the back then use a few dots of hot glue or superglue to hold in place, Please add negatives for your own wiring etc, On the rear part, Right click, Add negative, Cylinder, Then scale and move it to where you want the wire to enter, I like to use these off Amazon with a 12.3mm Hole, https://amzn.eu/d/iaNzUMN Feel free to add your own Wall hanger as know some like to use doubble sided tape rather then a screw etc, Drop a photo if you print it..... CULTS CU - Commercial Use You are authorized to: Print — sell and distribute 3D prints of the 3D model and its adapted models for any use, including commercial use, in unlimited quantities; Adapt — remix, transform and create from the digital files of the 3D model. What is not allowed: No sharing of your 3D prints, nor adaptation of the 3D model without attribution; No distribution, sale, donation or exchange of the digital files of the 3D model and the digital files of 3D models adapted from it.