Ford FlatHead V8 (8/14) / Engine Stand by CANAVESE DANIEL

Description

This is an Engine Stand extension for the Ford FlatHead V8 engine. The mounting holes are already present on the engine block. Original engine : https://www.myminifactory.com/object/3d-print-106731 My final project : Release01/02/2021 : The file EngineStandBackRightV2.stl replaces the file EngineStandBackRight.stl ; with this update you can remove the oil pan. Print Settings1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x EngineStandBackLeftSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%1 x EngineStandBackRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x EngineStandBackRightSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%1 x EngineStandBottom : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x EngineStandClasp : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x EngineStandFrontLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x EngineStandFrontRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x EngineStandLogo : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%1 x EngineStandLogoSupport : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% Accessories14 x m3 threaded insert2 x m2x5mm SHCS18 x m3x8mm SHCS2 x m3x30mm SHCS10 x m3 washer2 x m3 jam nut1 x electric wire (~20cm)1 x variable speed controller : https://www.amazon.fr/gp/product/B07MPWGF7P/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=12 x DC female panel mount jack…