Book house

Description

A night light in the shape of a brick book house. The models are printed without supports. To assemble this model, you will need glue, LED strip, and a power supply for the LED strip. I have uploaded 3MF files for Bambu Lab P1S where you can print the entire house body and 3MF files for Bambu Lab A1 mini where the house body can be printed in parts and assembled with glue. I have also uploaded the STL files. The house body and basement come in two types; see below for a description of the models. “STL House” is the body of the house. You can select this file if you want to print the entire body of the house and your printer has a build area of 25-25-25 cm. Like other models, this model does not require supports, but you can use them on the windows if you are not sure that the print will be successful. I printed all the files without supports. “STL First floor” and “STL Second floor” are the first and second floors of the house. You can select these files if your printer has a small build area, such as the Bambu Lab A1 Mini. After printing, you will need to glue them together. These models, like other models, do not require supports, but you can use them on windows if you are not sure that the print will be successful. I printed all the files without supports. “STL Basement v2” is the basement with a 3mm cable hole. You can select this file if you want to install LED strip lighting and connect it to the power supply without using switches in the model's body. “STL Basement”…