Ender 3 V2 Body Kit | Lowk Body Kit | Ender 3 V2 Upgrades | Ender 3 V2 Shroud |Ender 3 V2 Hot End | Ender 3 V2 Accessories by Lowk

Description

Here Is the Lowk Body Kit designed for your Ender 3 V2 I am very cosmetically inclined for the environment that I am in. I am surrounded by Ender 3 V2s in my office and I wanted to see if I can find a way to make them look cooler, rather than be surrounded by a bunch of black machines. After searching for something already made and not finding anything I took it upon my self to design a body kit that mirrored both my style and my environment. If you are like me and want your machine to look cool than this is definitely for you. This Pack Includes:Top Bar Cover with Connecting Piece and 2 Half PinsX-Axis PlateX-Belt TensionerBed HandleY-Belt Tensioner4 Plates to cover the base1 Compatible Plate for Dual Z2 Center Plates to cover the front2 Sides Holding the Center Plates with 2 Half Pins and 2 Full Pins2 Front extended Legs2 Rear Extended Legs You will need 8 m3 screws that are a minimum of 10mm long and 8 t-nuts to go along with them to fasten the plates to the printer frame.The X axis Plate cover that holds the sensor will need new m3 screws since the stock screws that were there, are way too long. The M3 kit I used is listed at the bottom is good for the body kit as well as replacement screws for the printer because the stock screws suck and strip easily. Check Urls at the bottom for both T Nuts and M3 Screw Kit The Shroud is not in this pack and is up for free on my page.I have listed the settings I use for speed since there is quite a bit of pieces to print. Everything…