Stick it Controller Grip

Description

Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform! Click here to join STLFLIX (https://www.stlflix.com/) Stick it like a pro! This grip gives you a bubblegum-hold on your controller. No slip-ups, just epic wins. This STL file is recommended for FDM Printers! 3D Printing Time : Monocolor - 3 Hour 40 Minutes* (may vary according to you Approximately Height: 10 cm *Note: Printing time based on a Bambu P1S printer, according to our tests. *Notice: Some overhang will be visible. If your equipment is calibrated and properly adjusted, this condition will be minimal. We recommend using support only on the bridge below the controller. Using support in other areas of the model is at your discretion. COPYRIGHT & SELLING RIGHTS This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it. To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file. Go commercial and skyrocket your own store with STLFLIX! GO COMMERCIAL! (https://www.stlflix.com/) USEFUL LINKS Get to know us a little better! Website (https://www.stlflix.com/) | Instagram…