Grenade launcher attachment for FNV groza

Description

The ultimate airsoft groza. You may have seen a couple before, but not like this one! GRENADE LAUNCHER NOT INCLUDED! This kit allows you to attach a Double Bell grenade launcher to your FNV AEG/HPA groza. It will ONLY be compatible with my groza, as it needs my mechanical trigger link to function. It's sadly NOT COMPATIBLE WITH MY GBB GROZA KIT. https://cults3d.com/en/3d-model/game/ots-14-groza-kit-cyma-aeg https://cults3d.com/en/3d-model/game/ots-14-groza-kit-lct-aeg The grenade launcher trigger operates the gearbox as well. In order to achieve this, you need a slightly different trigger link wire than in my original Groza kit. Then link enters into the back of the launcher through a hole in the back of the pistol grip.You have to drill that hole in the grip, about 11 mm (0.43 inch) measured from the top of the grip, dead center. On the other hand, NO MODIFICATION IS NEEDED ON THE LAUNCHER apart from popping off the rubber grip, obviously, but that is completely reversible. Firing looks like this: to fire the AKSU replica, you should have no grenade loaded. put the launcher safety lever to the fire position and of course use the fire selector on the AKSU to semi or full auto. Fire with the trigger of the launcher (It's a VERY HEAVY trigger pull) to fire the launcher, put the AKSU to safe, load a grenade in the tube, and fire with the very same trigger. The elasticity of the trigger link will still allow you to fire. You need an M6x90mm socket head bolt to mount the grip…