1/14 Ashley E1218 Scraper

Description

This is a custom build 1/14 scale scraper modeled after a popular make. Can be printed on a 220mmx220mm print bed. It has 3 functions, Lift - Up & Down, Door - Open & Close, and Pusher Fwd & Back. Requires 5 Electric Actuators, 4 Tires, 2 linear rails, and misc. hardware. Included in the files is a complete material list, as well as a 11 page, 15 step Build Manual (with Pictures!) Difficulty level - Beginner to Moderate. YouTube Build Video https://youtu.be/JlkQQbOlDdw I feel the manual is sufficient for any experienced builder! If there are any hitches that need to be added to the files please let me know. joey@schlattersinc.com is the best way to reach out with hitch requests. Optional Items: Spiral Cable Wrap 1/8" or 3mm, I purchased some from Amazon, also on AliExpress When ordering Linear Actuators, go for the Slower Speed Higher Torque 25mm stroke, 12V 30N 30mm s 75mm stroke, 12V 30MM S 32N will require 3 Esc on your Tractor to run the Lift, Door, & Pusher 12/3/24 Update: -added stl files for Norstate AT-01 Hitch, -added version 2 of lift actuators mounts "upper lift cylinder bracesV2" to give the scraper a different range of motion allowing it to go lower. -modified "rear cross beam" added holes for cable clamps 01/26/26 Update: link for the tires does not work, the tires are "1.9" 90mm Rubber Wheel Tyre RC Tire for RC Crawler 1/10 Model Car"…