Axolotl Onsen Set

Description

Included in this Purchase: STL/ 3MF multicolor file *This is a multipart file if you want it to look like the above pictures. Glue is required to put the Bathhouse together, and to keep the baskets on the onsen rocks from moving. Print Settings: No Supports needed 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray The Multicolor 3MF file has all parts included on 5 plates, with the layer changes already set up. There are more than four colors in the filament panel - Don't panic! Each plate only uses four or less. I have made an instruction PDF noting which height to put pauses or layer changes in for the stls. Keep in mind - If you change the size of the objects, you will either need to keep the Z scale the same or redo the layer color changes. I originally printed the onsen rocks separately, but it was a pain to click the water in, so they are combined now into a layer color change. Derpy Axolotl are available free on my makerworld account if you want to add them! Other Axolotl are in my welcome folder for Patreon and MMF Tribes. Filaments Used: Bambu Basic - brown, yellow, cyan, magenta, siiver, blue. Naga white, Aceaddity black Bambu matte pink. I also swapped the white and black for Bambu silk white and Eryone burnt titanium purple for the sign. All files were printed and tested on Bambulabs printers: P1P with AMS and an A1 mini For commercial use and/or more information, please check out my Patreon or MMF Tribes and the post…