TEMPLATE FOR GIFT BOXES - LeoMix3D

Description

I have designed this template that allows you to easily and quickly make little boxes for gifts with micro corrugated cardboard.It is a single piece that is used on both sides.The flat side is for trimming the contour of the curves and marking the bends with the sides.The other side is used to mark, by pressing, the curved bends of the lids.The template is designed to make a small box from a 15 x 15 cm piece of micro corrugated cardboard. Each side of the folded box measures 7 cm and a 1 cm flap is left to allow for gluing.This flap should be smoothed by flattening the corrugated in this area to improve the bonding surface.The design is scalable, either enlarging or shrinking in size. Just keep in mind, when cutting the cardboard, to leave 1 cm extra in width for the flap.When placing the template on the cardboard the longitudinal corrugation lines should be parallel to the straight edges of the template.It's a lot of fun and quick to make these little boxes that look very professional once finished.I hope you find it very useful and enjoy making your own little gift boxes!3D PRINTING SETTINGSFDM Creality Sermoon D1 FDM PrinterMaterial:The parts shown in the photographs are printed on PLA.Nozzle: 0.4 mmParameters:Layer thickness: 0.2 mmFilling: 25%.Top solid layers: 3Lower solid layer: 3Perimeters: 3Supports: NoRaft: No