Bird Bath With Shower - DMRHN

Description

Warning: Those without mechanical skills and knowledge should not purchase this model.This model has been shared here only after ensuring it is workingBirdBath-05 needs support but not touching build plate. otherwise, the water channel will be blocked by the support, and water flow will be interrupted.Your bird bath will not work.I designed a bird bath for my budgies.The design has a shower feature. Normally I could buy a ready-made water pump and attach it, but I designed the pump part to be printable to show what we can do with a 3D printer. My motor works with 1 AAA size battery. I also added the part design STL file for your motor that can be attached with 2 AAA size batteries.Cleaner with a large water tankLong-lasting use is aimed with the motor design above the water levelA shallow water level for your birdsYou will needwire,motor (1.5-3V),on-off switch(9x13mm mini switch),battery spring1 or 2 batteries (AAA size)Assembly instructions:Install the motor shaftInstall the motorInstall the on-off switch, battery and motor wires (motor rotation direction CCW)You can use a small amount of liquid gasket when assembling birdbath-01 and birdbath-05.Do not use fast adhesive to disassemble if necessary.insert battery, attach battery cover, fill with waterANDenjoy watching your budgies have funAttention:check and adjust the axis carefully when attaching the shaft to the motor. otherwise it may make noise.printed with Ender3v2ABS %35 infill 50mm/s240°C degree hotend100°C bed…