Med-Container

Description

I wanted a container to keep some small medical supplies such as bandages, alcohol wipes and maybe a sewing kit to throw in my hunting gear bag. Then I thought why not make one that could hang off of a bag or be thrown inside of it. So I came up with a longer threaded cap and a hex shaped hole which is large enough for a small-medium carabiner, or my personal favorite option: paracord. This container is water resistant as far as my testing went. Putting it under running water at a 45 degree angle to the top with a qtip, 2 bandages and a floss stick inside for a minute, and all was dry. The design failed the submerge test and is therefore not watertight, but honestly after 30s of being submerged the water inside was still less than I expected. So, for rain this is okay, but if you're crossing a creek with this on your waist mileage may vary. Internal dimensions are approximately 35mm in diameter, by 85mm in height, so plan your gear accordingly or print two and tie them together like some medical Nunchaku. Size comparison between my other containers in the last photo if you have printed any of those.