3d printer heat bed glue applicator - ReverseEngineering

Description

A new twist on the application of 3D printer bed glue.The 3D printer bed plate glue applicator is simple to use. It can be filled with a common glue stick (36 g). The roller transfers the glue from the applicator to the printer bed plate (3D printer bed). This way it is easy to control how much adhesive surface you need. If creating a more sticky surface is necessary, roll the applicator until you reach the desired stickiness. When applying glue with an applicator, a thin and even layer of glue is formed on the bed plate of the printer, it can be restored after each printing and the bed plate does not need to be cleaned for a long time.A cheap, simple and reusable gadget.When the glue runs out or dries, disassemble the applicator, wash it, put it back together, refill it and keep using it again.The applicator is effective for covering large surfaces where an even and voluminous adhesive coverage is required.https://www.youtube.com/shorts/WuD2dqmSDDshttps://www.youtube.com/watch?v=dG-HX2_tkpc&t=1s