Winterfell 200*300 by Igor Chamkin

Description

I didn’t suit me for various reasons. Liked the idea to create a lamp with LEDs. In this model, it is all provided. All towers are hollow. Designed for painting and installation inside the LEDs. I enclose possible schemes. The model is printed on the table 200 * 200 mm, and is connected from 2 pads. Plates are interconnected by glue. The remaining parts are inserted into their seats.This thing was made with Tinkercad.Edit it online https://www.tinkercad.com/things/8yJlKBw2E6BAlso saved on https://www.thingiverse.com/thing:3211003To connect 20 LEDs (20 mA, a voltage of 3.4V) to a 12V power supply unit. I attached. In the end, you will succeed.Rated resistance of resistors: R1..R6: 90 Ohm; R7: 260 ohmThe standard values ​​of resistors R1..R6: 91 Ohms (0.05 W); R7: 270 Ohm (0.125 W)Color marking:R1..R6: white, brown, black, gold, goldR7: red, purple, black, black, goldPower dissipation on resistors: R1..R6: 36 mW; R7: 108 mWLED power dissipation: 1.36 WCurrent consumption of the entire circuit: 140 mAPower consumption of the entire circuit: 1.69 W | Download free and paid 3D printable STL files