Exclusive: Flexi Factory Mummy and Sarcophagus with 3mf included by Flexi Factory

Description

This File is $3.99 with the Patreon or Tribes Membership Discount Code!!! Join Here: https://www.myminifactory.com/users/FlexiFactory ...................................................................................................... It's surely the season for ghouls, goblins and all things spooky! Holidays always seem to creep up on me, so I'm really glad you all voted on this one. I originally started designing the mummy as a floppy non-standing flexi, but quickly realized it would be much cooler standing...and it's still super floppy. I designed the sarcophagus top to be printed vertical (for stl) and horizontal (for 3mf). The Vertical orientation will turn out a smoother finish for single color prints. Multi-color prints should be done with the horizontal orientation to avoid an extremely lengthy print time and tons of waste. This model was test printed from 50% to 125%. It has very sturdy links, so it can be printed considerably small. Of course, some detail may be lost. Print tips and Info: STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.As usual. make sure you have good adhesion. I always use a glue stickGradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon…