Magnet Switch Dock Stand!

Description

I desined this to give a little more pop to the switch dock, and be able to store a couple games and micro SD's in it too! this stand is super customizable! I designed each logo to have nice sturdy earth magnet on the bottoms of them! So you can have fun designing your own! I have done a triforce and a bowser but you can totally make all different designs too! I added a stl file of the magnet cutout tool so feel free to explore and make your own. The magnet cutout is for the ones linked down below. HAPPY PRINTING! P.S. If you like my work check out more here! https://cults3d.com/en/users/ATrain080909/3d-models instructions: step 1 print all the parts needed to assemble. step 2 locate the 2 holes in the bottom of your logo and on the dock base. step 3 grab your magnets use super glue to glue them in the holes. SUPER IMPORTANT make sure the poles are right OR YOUR MAGNETS WILL NOT STICK! leeding to the logo not sticking to the base:( the magnets are 6.4mm in diameter and 1.6mm in length https://www.homedepot.com/p/Magcraft-Rare-Earth-1-4-in-x-1-16-in-Disc-Magnet-80-Pack-NSN0657/204721317