V-12 Engine, Optional Parts Kit, Engine Mount Frame

Description

This kit is the imaging model of “Engine Mount Frame” as option for V-12 Engine uploaded below. https://cults3d.com/en/3d-model/tool/v-type-12-cylinder-engine-water-cooled-cutaway In order to install this type of engine on the fuselage, the cantilever beam structure is required to support the center of gravity located forward. A. Assembly Manual Contents ① Engine Mount Frame Parts ② Display method [1]・・with Central Post as already uploaded [2]・・only with Engine Mount Frame B. Purchase Parts Information; -Aluminum Pipe - φ5 (For convenience, the size is unified) -Screws & Nut M1.4 (Screw), M2 (Screw & Nut) Quantity and size can be adjusted by your experience. D. STL file Total STL files are 7 items. “ws” of last 2 digits of file name means “With Support” special designed. E. Total Net Print Time: Approx. 9 HR - (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. F. Printing settings Raft, Support, Layer Height, Infill: Depending on your experience. 100% Infill is recommended for Parts having "Hinge, Yoke" to keep strength. My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA. I wish you success.