Proteus Key Holder by Protean Man

Description

Swiss Army Knife Style Key Holderupdated February 23rd 2018 All the info you need should be in this description. If you have any further questions please check the comments section. People have been sending tips! This is great considering that creating these designs and testing/adjusting from feedback takes time and effort. If you like the Proteus Keyholder consider sending a tip through the Tip Designer button on my profile page: https://www.thingiverse.com/ProteanMan/about This works like a swiss army knife with your keys folding into the holder. Each holder is designed to have an equal number of keys at each end. The center bolt keeps the keys from crossing onto each other. You can fit as many keys as you want on this, just have to get a long enough bolt. NEWOld fashioned key size. This is a requested edition and has been sized to fit a general purpose old fashioned key (see image). You will need spacers for this one - look in the files. This size is larger than the standard key size with a length of 112mm and a width of 33mm. Choices 3mm Bolts2mm BoltsLarge Key RingSmall Key RingMaterials Needed PETG, HTPLA, or ABS are preferred. Anything stronger works too. PLA may be too weak for regular use.3x bolts3x nuts or knurls(If you don't know what a knurl is then look at the pictures. You can buy them in packages online. Check image for knurl dimensions needed)Bolt SizesBoth 3mm and 2mm bolts can be found by measuring the thickness of the keys you want to put into the key…