Retraction / Stringing tower test with temperature set

Description

I tested some of the retraction and stringing test here, there are good ones, but i wanted to create my own one with the idea of an economic to print and simple two tower desing. Also I wanted the temperature ranges were visible enough, but maintaining the size of the towers small and slim. I created a set of preset towers with a 25 degrees range (covering the most common materials), one without temp texts (to allow someone editing the mesh to customize it for another specific range of temps), and finally one with a 50 degrees range just in case. The tower is just 30mm tall and 33mm long. Anyway, I added one photo with some dimensions.