My S3D Process FFF File
- 12 views
This model is hosted on Cults3D. Files, images and license details belong to the original creator.
View on Cults3D ↗Description
This is my FFF process settings for Simplify3D for PLA. Printer: Robo3D R1 Hotend: Hexagon, temp = 208C Bed: Glass + hairspray, temp = 60C. I use other adhesion methods too which require different temps. Auto-Level: No Layer Height: 0.3mm (0.2mm is slightly different for the 1st layer's settings to improve bed adhesion) Note: I set my temps via my RepRapDiscount Full Graphic Smart Controller so I remove all Temperature profiles from my S3D process. The "3DPG" in the file name refers to the filament source, 3DPrinterGear . I've included a small 10mm test cube, which is what I use to initially test various settings before moving on to more complicated calibration prints. I hope this proves to be useful.
About this model
My S3D Process FFF File is a free 3D model in the Other category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
