Ode to the song of the wind . Song of broken pines Genshin Impact STL

Description

3D .STL model of the Claymore Ode to the Song of the Wind sword, as seen in the Genshin Impact game. This includes 10 .STL files. The total length is scaled to 170 cm. The parts are suitable for a printer of at least 300 mm in height and 350 mm in width; if your printer is smaller, you can cut out the model. The two pieces can then be glued together. A 1m rod can be placed (not mandatory) in the center of the sword. Files include : PDF files .STL files Recommended post-processing : The parts can be glued together with super glue, I recommend pressing the parts together for 10 seconds and letting dry for a few minutes for strong connection. You can also use glue suitable for 3D printing or epoxy glue. Sand your 3D prints with sandpaper, using primer or spray filler to achieve a smooth surface. When you're happy with the results, your final coat should be a primer, before painting with acrylic. You can protect your work with satin or gloss varnish. The 3D models are made by me. These files are packaged in .RAR files, you must extract the files correctly in order to use them, if you have any problems doing this, please contact me. License information: You may not resell or distribute these files in any way. Not authorized for commercial use. You may not sell 3D prints or casts created using these files, with the exception of a limited (one-off) quantity such as commissions. Attribution must be given at least once when your project is created using these files: mention Darrkarra…