bottle cutter 2

Description

-Depends on the blade that you put will cut a thickness or another depends on the thickness of the cutter blade, its design makes it easy to cut the bottles by its curved groove in semicircle and if you have skill you do not need a clamping bar for the bottle, put bar for the most novice, also you have to have survey the step of 5mm so that when you push the bottle to cut that it has the same surface of 5mm so that irregularities do not happen, I advise you to put a sheet of 5mm of thickness so that this at the same level of the insertion groove and does not have step but you will break the filament immediately, the screwed zone has 5mm of thickness. -Material: 1 Rod for metal or wood bottle or 3d design. 6 Screws for wood or metal depending on where you screw it. 1 5mm plate or something to put it on the same level 1 40mm long screw of 4mm thick 1 nut 4mm thread Modified base for better cutting of bottles. Let's Recycle Chic@s. Greetings. modified thread below and screw above to lock the blade e put both the modelanteriror and updated.