【国际站】

Description

Creality K1 Max - Deluxe Top Lid Riser.With custom Front Text.It will get a rail for LED and aoptional TPU Spool Holder, that i´m currently working on, along with other accessories later.I wanted to make the most stable vibration-free riser possible, andalsowanted it to match my feet.I did consider vents but decided against it, as in my experience, they are not enough, and I need to remove the glass lid, when printing lower temp materials (I may make a V.2. with vents, at a later point).*Raises the glass plate 45mm.*Locks on, rather than just stand on top, so nothing moves.*Very sturdy, minimal vibration in riser and glass plate.*Held together with Custom Thumb Screws.*Grove for 8mm LED Strip all around, and a slot in the back, to run the strip through (There is a plug for the hole, if not used).There is also screw holes on the back, so LED wired can be mounted with clips.I used a cheap 2M Bluetooth controlled, USB powered, LED Strip from Ali Express, and use the printers own usb port for power, so it turns on with the printer.*The front and the Back, have 2x M3 Screw Holes (they have no specific purpose at this point, but I put them there, just in case i needed to add to it).*It will get a optional TPU Spool Holder, that can be easily mounted with thumb screws. (I´m almost done with it, and will upload it as soon as i´m done/satisfied).Printed in ****** Rapid PETG.For the Riser I used just under 640g filament.I uploaded the Front, with my text, and a version with no text.If…