Hypercube Evolution tennis ball damper
- 17 閲覧
このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Cults3D で見る ↗説明
Vibration damper based on tennis ball designed for Hypercube Evolution. It could be used for any printer based on 3030 profiles. BOM for one damper: * 1pc tennis ball (of course) * 4pcs M5 hammer nut for 3030 profile * 4pcs M5x12 or M5x10 screws, HEX head recommended (DIN7380 or DIN912) * 1pc M8x20 or M8x25 screw, HEX head recomended (DIN912) Printed from PETG, 3 perimeters, 5 top/bottom solid layers, nozzle 0.4, layer 0.2, infil 20%, without support. Weigt is 50 grams each. You can download and modify OpenSCAD source for this part. Update 2018/01/10: tested on real printing during (silent) night. Works very well.
About this model
Hypercube Evolution tennis ball damper is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
