DIY tablet holder

無料 STL ガジェット

13 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

説明

Shelf support thickness 10-15-20-25-30-35 mm thick 10mm Compatible Microsoft Surface3 ( and its keyboard) Thinkpad10 25 mm Compatible Panasonic FZ-G1 Metal part: To be created in a 4mm thick sheet metal 25mm wide minimum to be adapted according to the configuration of its position to weld together according to the shelf (camera button...) Additional part to be printed in TPU95 50%. requires: M8*25 x2 screw M8 x 2 nut Screw M5* 20 (or more depending on thickness) (M5 nut if no thread) Cable support or hub with longer screw M5*30 Compact USB plug reinforcement for single model 3Pro surface version for more grip you can see it in this video https://www.youtube.com/watch?v=u_cRjiCn22A&t=97s at about 1minute 20 - 50 or this one https://www.youtube.com/watch?v=PjPZtEZlhRw

About this model

DIY tablet holder is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.