説明
These are the prototype files for Me163b Komet. 1:12 scale 800mm wingspan. ~650 - 700g AUW. Model flies very well - so the price goes to standard price for such creation.. Only 290g of standard PLA. LW-PLA should be about half of that. 2 motor setup: 2830/36 1000kV for 4S (2500mAh Liion, or 1500mAh) or High power BR4108 600kV for 6S (1300mAh). Prop from 7x6 up to 9x6. Build video: https://www.youtube.com/watch?v=tp2MLBWkkcw Maiden flight video: https://www.youtube.com/watch?v=TZgQTLbcm7E 28 OCT 2021 - added rev 2 with small improvements a) added grip for fingers in the main skid b) added small reinforcements in the tail skid c) added modified main wing root reinforcements d) added new CG location (3mm behind current one) Another flight video (28 OCT 2021) https://www.youtube.com/watch?v=f0s-lJL5t60 Some additional info: Technical discussion thread on RCgroups: https://www.rcgroups.com/forums/showthread.php?3813509-1-12-Messerschmitt-Me163b-Komet Additional hardware: 1.5mm CF rods (can be 0,8mm welding wire as well) 4 x 440mm for fuselage 4 x 330mm for wings 2 x 335mm for ailerons hinges AND 6mm CF or glass fiber or aluminum - main spar - 250-350mm. Holes are 6.5mm but they print a bit undersized. If 6mm is not available - then 5.5 or even 5mm is OK with some roll-on masking tape for fit. 6.25 should also fit - after some "gentle" treatment of the holes with drill... Control surfaces setup: 0.8 - 1 mm up-trim (2x TE thickness) Elevator throws: +/- 14mm (with 50%D/R = 7mm the…
About this model
3D Printed Me163b Komet is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
