Kiting reel

説明

Durable, easy to operate kiting reel. I've tested it in a strong wind with quite big kite and it works well. I'll add bigger version later. Unprinted parts: some M3 bolts (at least 3 with countersunk head) 2x M2x10+ bolt 2x bearings 10-15-4 ballpoint pen spring or push spring 4-5mm diam. and ~4cm length Assembling Screw together bottom, middle and top parts of the wheel; use countersunk bolts to join bottom and middle. Put bearings into holes in the top and bottom part - bearings are higher a bit, that's OK. Add rot-handle to the top part of the wheel. It should rotate freely and it's bolt must not go to the space for the line. Connect the finished wheel with a handle using axis; you can gently use a hammer but be careful, wheel must move freely! It should hold firmly without any glue. If not, there is a 3mm hole which can be used to fix it better with a piece of kitchen stick. Put the pen spring into a hole in handle, press it and screw lock on it's place. There is a pin for the spring on the lock. Attach line guide to the front part of the handle with 2 M2 bolts. Sorry for my English :-)