Alpha 3D Model Rocket by Jokeane
- 16 閲覧
このモデルは MyMiniFactory で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
MyMiniFactory で見る ↗説明
This is my tribute to a classic Estes kit. The Estes Alpha III was one of the first rocket kits I built as a kid. While this isn't an exact copy of that kit, it is quite similar appearance. You can either print just the nose cone and fin canister and use standard BT-50 body tube (6" long) or you can print the body tube model using 'vase mode' (single wall spiral w/ no top or bottom). You can use either ABS or PETG for printing. I used ESun PETG translucent orange for my 'full print' version. For ABS I've found the FoxSmart ABS to be a good and cost effective filament. The version built with a standard body tube has red FoxSmart ABS for nose cone and fin canister. The 'thick' version of the fin canister has slightly thicker fins for more durability. Try an A8-3 for first flight, B6-4 for second flight. Launch video: https://youtu.be/lyxZVnFooGs | Download free and paid 3D printable STL files
About this model
Alpha 3D Model Rocket by Jokeane is a 無料 3D model in the その他 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.
