Corner Clock by MING
- 14 閲覧
このモデルは MyMiniFactory で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
MyMiniFactory で見る ↗説明
Corner Clock Clock dimensions: 180mm.Quartz clock movement dimensions: 55.8x55.8mm.Hole size for the logo: 2.2mm(If you want to replace the logo, the back cylinder can be set to 2mm).The bracket is installed in the corner using self-tapping screws, either M4 or M5. Only one screw is needed.(Alternatively, you can use a Plastic Hard Wall Picture Hook with a diameter of 13mm. First, nail it to the wall, then apply adhesive to the holes on the Bracket and stick it to the Hook).The top of the Bracket can be installed with a pin without using adhesive.Once the Bracket is installed, simply hang the clock on the Bracket. No additional support is required.Recommended fill rate for the clock: 15%-20%.Recommended fill rate for the Bracket: 30%.Layer height recommended: 0.2mm. | Download free and paid 3D printable STL files
About this model
Corner Clock by MING is a 無料 3D model in the その他 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.
