P6 Improved Kickstand

説明

P6 Kickstand Upgrade (Improved Stability Version) This is a redesigned replacement kickstand for the InMotion P6, built to improve stability and durability over the stock part. It adds two extra “knubz”, inspired by the InMotion V14 kickstand, which help prevent tipping and reduce flex when the wheel is parked. Looking for the version with the backpack system? Click Here (https://cults3d.com/:3971212) Version 3 1/14/2026: Slightly changed angle on knubs so the kickstand sits more flat on great. Update 1/4/2026: Relased V2 of the kickstand with improved "Knubz“ geometry for more stability and flattened the bottom surface for easier 3D printing. Update 1/2/2026: Included only the "Knubz“ so you don't have to reprint the whole kickstand. I would affix these to the kickstand with either E6000 or some JB Weld. 🖨 Print Recommendations Material: TPU 72D (98A will work but is too soft for perfect rigidity) Walls: 5 Infill: 10% Triangle Supports: Organic / Tree supports Orientation: Kickstand up as it sits normally. Your slicer can do this for you. Optional: For added strength, I would recommend using a modifier in your slicer to make the first 25mm have 75% infill. 📌 Notes & Future Plans This model fully replaces the original kickstand Designed for increased ground contact, stability, and longevity Planned update: a version that allows the extra knubz to be attached to the stock kickstand using screws and/or adhesive The model is free to download. If it’s useful, tips are always…