Helmet Stand Value Pack

説明

This is the H3D creations Helmet Stand Value Pack. What is Included? -Normal Stand Base -Wall Mount Base -Angle Bracket (For Wall Mount Stand) -Topper Angle Bracket (For Wall Mount Stand) -174mm, 120mm and 75mm long Poles -Curved and Flat Toppers -All Current and Future Faceplates Designs (Refer to bottom for all current designs) -All Current and Future Inlay Designs (Refer to bottom for all current designs) -Blank Faceplate (For Custom Designs) -Blank Inlay (For Custom Designs) Tips: -The stand can be attached by simply pressure fitting the pieces together - It is recommended to do the faceplates and inlays in two different colors, utilizing your filament swap function on your 3d printer. The base being one color and the design being another. Nameplates and inlays are removable for easy face up printing for the best detail -There is multiple sized poles depending on the height of your helmet. Using two of the 174mm poles for the Normal stand is recommended for most helmets providing the ideal space between the bottom of the helmet and the stand base. For the Wall mount Stand using 1x 175mm Pole and 1x 75mm Pole is recommended - (for Wall Mount) Print the Angle Bracket with the Cross face flat on the build plate. No Supports should be needed. Use 5-7mm Brims. Some light sanding/filing may be need on the Cross before installing. - If using Bambu or Orca slicer you can add a cylindrical modifiers that have 100% infill to the stand base where the screw holes and where the angle…