Drive Coupling - Gary67
- 21 閲覧
このモデルは Creality Cloud で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Creality Cloud で見る ↗説明
Broken coupling on a Magic Bullet Mixer?Unscrew the coupling (left hand thread so "Righty- Loosey" and "lefty -Tighty"Break the remaining coupling fragments off. File any sharp edges on the drive holes.You may need to tweak the holes a bit (I made them tight" and file the 3.5mm pin.I fitted the pin into the holes then cut it so I always had a piece long enough to hold.I used Super glue. Media is PETg. 60 deg build plate and 220 deg nozzle. 50mm/min, 0.4mm nozzle
About this model
Drive Coupling - Gary67 is a 無料 3D model in the その他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
