Articulated baby Dragon, print in place, no supports - NozzleNook bottega3d

説明

Articulated Baby Dragon, print in place, no supports.3 TAIL SIZE and 3 POSITION for DIFFERENT PRINTERA cute Articulated Dragon, great movement.6 different files for different printers and tail sizes.• 3 files in rectangular/square position resizable up to 50%.• 3 files for printmill/infinite Z printers.• 3 files for resin printers with 20 cm large screen **(TESTED)**.It is printed in place and doesn’t require supports. If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.FDM SETTINGNOZZLE DIAMETER: 0,4 mm.LAYER: 0.2 or lessOUTER WALLS: 3INFILL: 10%SUPPORTS: NOZ-HOP: 0,2 – 0,4RESIN SUGGESTED SETTINGSNo supports, flat on plate50 um layer thicknessLight off delay can be helpful to let resin drip from joints.LICENSE: For personal use onlyAll my files are protected by Copyright, should NEVER be shared or resold.To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit:PATREON www.bottega3d.com