説明
If You have bought the Stearman PT17 fra 3d labprint: https://3dlabprint.com/shop/stearman-pt-17-kaydet/ With this hack, you dont need to reverse the shaft! (This includes only a hack - not the starmotor! You might have realized that You have to reverse the shaft of the motor, which I didnt succede in doing cause one of the screws holding the shaft is stuck. If You want to reverse the shaft, take a look here: https://www.youtube.com/watch?v=4jSix3rUI2E The motor is: Turnigy 3542/5 1000-1250KV I have added an stl model with the support 1 mm thicker for those of you with a smaller motor. It seems thou that the Turnigy Aerodrive SK3 only has 3 holes in the back for fastening, and my has 4 - if that is correct I have to make a more timeconsuming alteration of the original! The 4 bolds are DIN917 M3 x 16mm. You have to expand the hole in the front of the starmotor one mm or so, with a roundfile!
About this model
Stearman PT17 Hack is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
