Adjustable cushion for bed, table,...
- 11 閲覧
このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Cults3D で見る ↗説明
This time I have designed an adjustable dowel to wedge a bunk bed, I have placed one in each leg, the outer diameter of the piece is 37.2MM, and the height adjustment depends on the length of the screw that we insert. As for the screw and nut to be inserted are metric 8, the nut is inserted during printing, the printing is stopped half way through (set on the laminator), the nut is placed and the printing continues. The screw is stuffed at the end of the printing of the lower part. I printed it in petg for a little extra strength.
About this model
Adjustable cushion for bed, table,... is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
