Simple Modular & Customisable Picture Frame
- 17 閲覧
このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Cults3D で見る ↗説明
A simple self-standing picture frame., knocked up in a few moments using Fusion 360. You'll need to two of the corners with the feet for the bottom and then two of the bare corners for the top. The sides can then be scaled along their length to match the size of the picture you wish to frame. All pieces should print without support, but I put a brim around to prevent warping depending on the filament used. I'd suggest putting a piece of board in with the photo, and sand each of the ends until smooth and then super-glue them together around the frame. The quite dark gold filament I used for the frame for a picture of my kids (shown here) almost came out like bamboo.
About this model
Simple Modular & Customisable Picture Frame is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
