説明
Never again will your plant run out of water! Simply fill the reservoir and your plant will water itself! (just remember to check the water level once a week). I designed this planter to be easy to 3D print. No supports and most importantly, no leaks! Post print: If you are not able to make the lower chamber where water collects water watertight, coat the inside of the tank with epoxy or food-safe sealant after printing to prevent leaks, such as this one: https://cutt.ly/ExtLojo . To make the water percentage indicator go up and down, you just need to cut out a polystyrene block, if you don't have it at home you can buy this one https://cutt.ly/yxtLls3 . To transmit moisture from the lower chamber to the soil area for the plant, you just need to cut out a floral foam block, if you do not have it at home you can buy this one : https://cutt.ly/bxtLn1b . PLANTERSXCULTS
About this model
Auto Watering Pot is a 無料 3D model in the ファッション・ジュエリー category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
