Forklift Gpu Stand

Forklift Gpu Stand

無料 STL ガジェット
  • 16 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Cults3D で見る ↗

説明

Design The Forklift GPU Stand is designed to mimic a miniature forklift, providing a fun and artistic way to display or support a GPU or similar component. Purpose This stand serves both as a functional tool to support a GPU and as an artistic display piece, adding a unique touch to any tech enthusiast's setup. Printing Suggestions Material: PLA or ABS recommended for better durability. Layer Height: High-resolution settings for smooth finish, around 0.1-0.2 mm. Infill: 15% Supports: Minimal or no supports required depending on your printer’s bridging capabilities. Assembly Instructions 1.75 mm filament used for axles, (wheels are functional but will not move the model for gpu support) lift arm sticks to the base all other parts are press fit plus some glue. the adjustable forks have a screw to tighten the lift at the correct height for your gpu. Scaling may be necessary for smaller gaming towers

About this model

Forklift Gpu Stand is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

類似モデル