storage box 80x80x30mm - XP3Design

storage box 80x80x30mm - XP3Design

無料 STL 収納・整理
  • 11 閲覧

このモデルは Creality Cloud で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Creality Cloud で見る ↗

説明

Size of Box: 80x80x30mm ( 8cm x 8cm x 3 cm) (inside volume) Design Concept This is stackable storage boxes. there are 3 parts. 1. Bottom box (Blue color) 2. Top Lid ( green color) 3. compartment (Removable) (Orange color) 4. Pins (Left and right pin) Print settings. layer height : 0.2 mm Wall thickness: 3 Infill: 30% Support: On adhesion : Brim Top/Bottom : 3 layers Assembly. 1. Print all parts attached in STL file format. 2. Use glue to attach pins (First insert any of pins from one side and then glue 2nd pin and insert inside till they properly fit in each other places. 3. confirm rotation of Lid(Do not use excess glue, tiny amount is sufficient).

About this model

storage box 80x80x30mm - XP3Design is a 無料 3D model in the 収納・整理 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

類似モデル